Centrifugal Roof & Wall Fans

SDBD and SDBDe Models

SDBD and SDBDe

Downblast Direct Drive Centrifugal Roof Exhaust Fans

SDBD and SDBDe direct drive fans are designed to exhaust air up to 4,984 CFM, with high static pressure capability up to 1-1/2". The non-overloading backward inclined wheel with its higher static pressure capability makes these units suitable for either ducted or non-ducted applications. The spun aluminum exterior provides an attractive appearance. Direct drive units use smaller diameter wheels, resulting in low sound levels and quiet operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance. Its roof mounting permits short duct runs and more efficient operation.

In-Stock Availability
SDB Model

SDB

Belt Drive Centrifugal Downblast Roof Exhaust Fan

The SDB belt drive fans are designed to exhaust air up to 31,563 CFM in high static pressure applications up to 1-3/4". The aluminum exterior provides an attractive appearance. Belt drive results in lower operating RPM and sound levels, making the Model SDB well suited to applications where quiet operation is important. Belt drive also permits easy performance adjustments when needed to balance the total ventilation system. The non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof mounting permits location near the area to be ventilated, allowing short duct runs and more efficient operation.

In-Stock Availability
STXD, STXDe, and STXDeRHUL Models

STXD, STXDe, and STXDeRHUL

Upblast Direct Drive Centrifugal Roof/Sidewall Exhaust Fans

The STXD direct drive fans are designed to exhaust air up to 4,780 CFM, with high static pressure capability up to 1-1/2". The non-overloading backward inclined wheel, with its higher static pressure capability, makes this unit suitable for either ducted or non-ducted applications. Its roof or wall mounting permits short duct runs and more efficient operation. Direct drive units use smaller diameter wheels with lower RPM's, resulting in low sound levels and quiet operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

In-Stock Availability
STXB, STXB-RHUL, and STXB-HP Models

STXB, STXB-RHUL, and STXB-HP

Upblast Belt Drive Centrifugal Roof/Sidewall Exhaust Fans

STXB and STXB-RHUL Upblast Belt Drive Centrifugal Roof/Sidewall Exhaust Fans are designed to exhaust air up to 37,920 CFM in high static pressure applications to 3". The aluminum exterior provides an attractive appearance. Belt drive results in lower operating RPM and sound levels, making the Series STXB well suited to applications where quiet operation is important. Belt drive also permits easy performance adjustments when needed to balance the total ventilation system. The non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or sidewall mounting options permit location near the area to be ventilated, allowing short duct runs and more efficient operation.

In-Stock Availability
STXB-HT2 Model

STXB-HT2 and STXB-HT

High Temperature Upblast Belt Drive Centrifugal Roof Exhaust Fans

The STXB is now available with the UL Smoke Control Options (HT2 and HT). These fans can provide emergency heat and smoke ventilation in the event of a fire, which can provide valuable time to people exiting or emergency personnel. The HT2 has a steel wheel and is certified to exhaust heat and smoke in emergencies [500°F (260°C) for 4 hours and 1,000°F (538°C) for 15 minutes]. The HT has an aluminum wheel and is certified to exhaust heat and smoke in emergencies [500°F (260°C) for 4 hours].

In-Stock Availability
LPD and LPD-SF Models

LPD and LPD-SF

Low Profile Direct Drive Centrifugal Roof/Sidewall Exhaust Fans

LPD and LPD-SF direct drive fans are designed to exhaust air in low CFM (up to 420), with high static pressure capability up to 1-3/4". When aesthetics are a concern, the low profile design of the LPD is the perfect choice. The LPD is generally used for bathroom, office or light commercial ventilation in ducted systems; and can be mounted either on the roof or wall as the application requires. The LPD is designed for curb mounting. The LPD-SF has a flat, self-flashing base for roof or sidewall mounting.

In-Stock Availability
CWD Model

CWD

Direct Drive Centrifugal Sidewall Exhaust Fan

Centrifugal Wall Mounted Exhauster Direct Drive Fans (CWD) is designed to exhaust air up to 3,360 CFM, with high static pressure capability up to 1". The spun aluminum exterior provides a pleasing appearance, weatherproof construction, and resistance to corrosion. The low silhouette design is less noticeable on the building exterior, and the removable dome provides easy access to the fan interior for service and cleaning. The non-overloading backward inclined centrifugal wheel with its high static pressure capability makes it suitable for either ducted or non-ducted applications. It should be used where a sidewall mounted location is preferred to roof mounting. Direct drive units use smaller diameter wheels with lower RPM's, resulting in low sound levels and quieter operation. They have no belts or fan bearings to maintain or adjust and consequently require very little maintenance.

In-Stock Availability