Accessories
JenCoFan's accessories are available to enhance your air movement system.
411
Non-flanged horizontal mount exhaust backdraft damper
- Sizes available: 8"W x 8"H to 30"W x 30"H
- Galvanized Steel frame with aluminum blades
- Maximum free area velocity - 2000 fpm
- Optional motor pack available (411611)
- Use in roof curbs, duct work or wall collars when using a fan or power roof ventilator
611
Non-flanged horizontal mount exhaust backdraft damper
- Sizes available: 34"W x 34"H to 48"W x 48"H
- Galvanized Steel frame with aluminum blades
- Maximum free area velocity - 2250 fpm
- Optional motor pack available (411611)
- Use in roof curbs, duct work or wall collars when using a fan or power roof ventilator
502
Rear flanged low velocity gravity exhaust shutter
- Sizes available: 10"W x 10"H to 24"W x 24"H
- Galvanized Steel frame with aluminum blades
- Maximum free area velocity - 2000 fpm
- Use with direct or belt drive exhaust fans
- For vertical mounting only
556
Rear flanged general purpose exhaust shutter
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Single or Double Panel
- Galvanized Steel frame with aluminum blades
- Maximum free area velocity - 2500 fpm
- Optional motor pack available (EAS)
- Use with direct or belt drive exhaust fans
- For vertical mounting only
EAS-RF
Rear flanged exhaust shutter for areas where corrosion may be a problem
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Single or Double Panel
- Aluminum frame and blades
- Maximum free area velocity - 2500 fpm
- Optional motor packs available (EAS)
- Use with direct or belt drive exhaust fans
- For vertical mounting only
EAS-HDGS
Rear flanged exhaust shutter for applications that require higher velocities.
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Single or Double Panel
- Aluminum frame and blades, stainless steel tie rods
- Maximum free area velocity - 3250 fpm
- Use with direct or belt drive exhaust fans
- For vertical mounting only
FGS
Rear flanged exhaust shutter for areas where corrosion is a known problem
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Single or Double Panel
- Heavy-duty fiberglass pultrusion frame and blades, stainless steel tie rods
- Maximum free area velocity - 2500 fpm
- Use with direct or belt drive exhaust fans in chemical plants and poultry/swine confinement operations
- For vertical mounting only
304SS
Rear flanged exhaust shutter for areas that require extreme corrosion resistance
- Sizes available: 12"W x 12"H to 36"W x 36"H
- 304 stainless steel fame and blades, stainless steel tie rods
- Maximum free area velocity - 2500 fpm
- Use with direct or belt drive exhaust fans in chemical plants and food processing operations
- For vertical mounting only
EASB & EASW
Rear flanged exhaust shutter for areas where corrosion is a known problem
- Sizes available: 36", 39", 51", 54" square
- Painted extruded aluminum frame with UV stabilized PVC blades with yellow zinc dichromate rods
- Maximum free area velocity - 1500 fpm
- Use with direct or belt drive cone or slant-wall exhaust fans in poultry or swine confinement areas
- For vertical mounting only
- Available in white or black
Backdraft and Motorized Dampers
ACD
Extruded aluminum motorized volume control damper
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Extruded aluminum hat channel frame with extruded aluminum blades
- Internally mounted factory installed 100-240 volt power open / spring close motor with an end switch
- Maximum free area velocity - 3500 fpm
- Use in exhaust or supply applications
- For vertical or horizontal mounting (typically walls or curbs)
AMD
Heavy duty motorized volume control damper
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Extruded aluminum frame and blades
- Internally mounted factory installed 120/240 volt power open / spring close motor with an end switch
- Maximum free area velocity - 3500 fpm
- Use in exhaust or supply applications
- For vertical or horizontal mounting (typically walls or curbs)
CAR
Metal Backdraft Damper
- Sizes 100 to 400
- Galvanized Steel Collar
- Lightweight Aluminum Damper Blade
- Spring loaded for positive closure
GMD
Heavy duty motorized volume control damper
- Sizes available: 12"W x 12"H to 48"W x 48"H
- Galvanized steel frame and blades
- Internally mounted factory installed 120/240 volt power open / spring close motor with an end switch
- Maximum free area velocity - 3500 fpm
- Use in exhaust or supply applications
- For vertical or horizontal mounting (typically walls or curbs)
MCA
TD Twin Direct Connection Backdraft Shutter
- Sizes 100 to 315
- Shutter prevents air from re-circulating when the fans not in use.
- Fits over TD lip
MD
Motorized Damper
- Sizes 4-14
- Normally closed, power open, 24V motorized damper for round ducts.
- Control the sequencing of outside air in forced air systems.
ACL
Extruded aluminum combination louver/damper
- Sizes available: 18"W x 18"H to 48"W x 48"H
- Offers superior resistance to rain and weather
- Ability to completely close the opening if needed
- Standard birdscreen on the interior
- Extruded aluminum frame
- Drainable style 45 degree extruded aluminum blades
- Optional motor packs available (MTR-ACL)
ECM-DPC
EC Differential Pressure Control
- Designed to control an EC Motor powered fan
- Used to maintain an adjustable static pressure set point
- Is recommended for Rooftop Exhaust, Cleanrooms, Ventilation Systems, Restaurants, Multi-family, Residential Hotels applications
ECM-MSPD
ECM Multi-Speed Control
- Is an interface for setting and switching two independent motor speeds for a single motor
- Uses an open-closed contact (by others) to switch between speeds easily
- Has on-board multi-meter nodes to provide set-point and RPM measurements
- Is recommended for use in restaurants, multi-family, condosm and shcools where manual or demand for controlled ventilation applications require high and low speed operation
THVLS Eco-Digital
7” Digital Touch Screen Multi-Fan Controller
THVLS Eco-Digital 7” Digital Touch Screen Multi-Fan Controller allows you to control multiple fans in groups or individually. Its fully digital interface features visual indicators of speed and direction with password lockout capability.
- Control multiple fans in groups or individually
- 0-100% speed control
- Fully digital interface
- Visual indicators of speed and direction
- Password lockout capability
THVLS Eco-Manual
THVLS Eco-Manual Single Fan Controller
THVLS Eco-Manual Single Fan Controller allows manual control of a fan speed in the cooling direction. One THVLS Eco-Manual controller controls one THVLS fans.
- Easily mounted to wall
- Control each fan individually
- S&P USA supplies you with 100 ft. of 6-core cable for installation
- Operate your fans in forward (cooling) motion
- Manually control each fan’s speed.
ADL
Aluminum door louver
- Can be used to transfer air through any barrier
- Ideal for use with 1-38" to 2-1/4" thick wood or metal doors
- Extruded aluminum frame and blades
- 204-R1 clear anodized finish
SDL
Steel door louver
- Can be used to transfer air through any barrier
- Ideal for use with 1-38" to 2-1/4" thick wood or metal doors
- Cold rolled steel frame and blades
- Gray primer finish
BreatheClean Filter Box
Straight
- Uses advanced filtration and Engineered with NPBI®, the patented technology that removes contaminants, including pathogens, from interior air.
- Comes standard with MERV 13 Filters
- UL2998 Certified
BreatheClean Filter Box
Banked
- Uses advanced filtration and Engineered with NPBI®, the patented technology that removes contaminants, including pathogens, from interior air.
- Comes standard with MERV 13 Filters
- UL2998 Certified
BreatheClean Filter Box
Residential
- Uses advanced filtration and Engineered with NPBI®, the patented technology that removes contaminants, including pathogens, from interior air.
- Comes standard with MERV 13 Filters
- UL2998 Certified
AFL
Aluminum fixed louver
- Sizes available: 18"W x 18"H to 48"W x 48"H
- Provide good protection from rain and weather at an economical price
- Standard birdscreen on back
- Aluminum frame
- K-style non-drainable 45 degree aluminum blades
GFL
Galvaneal steel fixed louver
- Sizes available: 18"W x 18"H to 48"W x 48"H
- Provide good protection from rain and weather at an economical price
- Standard birdscreen on back
- Galvaneal steel frame
- K-style non-drainable 45 degree galvaneal steel blades
DFL
Drainable extruded aluminum fixed louver
- Sizes available: 18"W x 18"H to 48"W x 48"H
- Drainable blade design channels water away from the blades and down the jambs
- Standard birdscreen on back
- Extruded aluminum frame
- Drainable style 45 degree extruded aluminum blades