HR by S&P Heat Recovery Ventilator

HR Models

Model Features

  • Polypropylene HRV core
  • 3 operating modes (Intermittent, Continuous and High Speed)
  • DuotrolTM balancing system reduces noise that would be produced by balancing dampers
  • Unique collar system for easy manipulation of duct for better and quicker installation
  • Painted galvanized steel case
  • Designed for simple installation by a single person
  • Washable filters
  • Fully insulated case
  • HVI Certified

HVI Certified

Model Overview

The S&P HR Series heat recovery ventilators (HRVs) are ideal for use in cold climates where home heating is essential. The HR Series uses one motor to exhaust stale room air and another motor to bring fresh outdoor air back into the house. The technology of a plate heat recovery core is that it transfers warm ambient air from one airstream to the other without mixing the air streams for maximum efficiency and comfort.

The HR Series has been engineered & designed to improve indoor air quality by reducing excess humidity and contaminants during the winter time, and replacing this air by fresh filtered air from the outdoors. During colder seasons, the units' heat recovery core (polypropylene core) will reclaim the heat from the outgoing stale air and use this heat to temper the incoming fresh air, which reduces the cost of effectively ventilating the home during winter. This process is reversed for summer months.

Limited lifetime core warranty and 5-year warranty on the unit balance.

Energy Performance (Heating)

Model Supply Net Air Flow Power Consumed (Watts) Sensible Recovery Efficiency Apparent Sensible Effectiveness
Temperature
°F °C CFM L/s
HR100V 32 0 40 19 28 64 72
32 0 65 30 40 59 66
-13 -25 37 18 30 55 73
HR160H 32 0 65 31 72 66 75
32 0 83 39 80 63 72
32 0 107 50 94 60 67
-13 -25 76 36 72 56 73
HR220H 32 0 118 55 106 61 71
32 0 160 75 132 58 65
32 0 185 87 150 55 62
-13 -25 120 57 105 58 72

Ventilation Performance for HR100V

External Static Pressure Net Air Flow Gross Air Flow Supply Gross Air Flow Exhaust
Pa in. w.g. L/s CFM L/s CFM L/s CFM
25 0.1 47 99 48 100 48 102
50 0.2 44 93 45 94 43 92
75 0.3 39 83 40 84 38 80
100 0.4 35 75 35 75 36 78
125 0.5 30 65 30 66 32 68
150 0.6 27 56 27 57 25 52
175 0.7 22 46 22 47 19 41

Ventilation Performance for HR160H

External Static Pressure Net Air Flow Gross Air Flow Supply Gross Air Flow Exhaust
Pa in. w.g. L/s CFM L/s CFM L/s CFM
25 0.1 91 193 91 194 103 217
50 0.2 84 178 85 179 95 201
75 0.3 77 163 77 163 86 183
100 0.4 71 150 71 151 80 169
125 0.5 63 133 63 134 71 152
150 0.6 57 120 57 121 66 138
175 0.7 51 109 51 109 57 121

Ventilation Performance for HR220H

External Static Pressure Net Air Flow Gross Air Flow Supply Gross Air Flow Exhaust
Pa in. w.g. L/s CFM L/s CFM L/s CFM
25 0.1 117 248 118 250 130 277
50 0.2 108 229 109 231 119 253
75 0.3 102 218 103 220 110 234
100 0.4 94 200 95 202 101 216
125 0.5 85 181 86 183 92 197
150 0.6 77 163 78 165 82 175
175 0.7 69 146 70 148 71 151

Dimensions for HR100V

Dimensional Drawing HR100V

Dimensions for HR160H

Dimensional Drawing HR160H

Dimensions for HR220H

Dimensional Drawing HR220H

Note: Additional accessories are available for certain products. Contact your JencoFan Representative for more information about these accessories.

Standard Accessories

Part Description  
HRT-3 Percentage Timer Control   Download
HRRD-1 Push Button Point-of-use Control   Download
HRRD-3P Percentage Timer Control with Furnace Interlock   Download
FLTK-HR100V Filter Kit for HR100V (2 Pack)   Download
FLTK-HR160H Filter Kit for HR160H (2 Pack)   Download
FLTK-HR220H Filter Kit for HR200H (2 Pack)   Download

Description  
Total Recovery Ventilators Brochure   Download
HR Catalog Pages   Download
HR100V Product Submittal   Download
HR160H Product Submittal   Download
HR220H Product Submittal   Download
HR IOM   Download
HR Series Homeowners Guide   Download
Wiring Diagram (HRRD-1)   Download
Wiring Diagram (HRRD-3P)   Download
Wiring Diagram (HRT-3)   Download

  • General/Clean Air
  • Contaminated Air
  • Heat Recovery